When was the last time the roof of your building was inspected? If it has been awhile, the roof may have problems lurking that need immediate attention. Some roof problems cause obvious signs such as leaks, while some produce subtle signs which are only detectable at first glance. In either case, leaving the issues unaddressed can cost you a small fortune once you finally repair them. If the roof on your building has the problems listed below, an organization that focuses on commercial roofing should repair them quickly:

Buckled Panels

Roof panels buckle due to weather damage and poor installation. Regardless of the cause, the buckling allows wind to blow underneath the panels, making them loose. Because the problem worsens, the panels start to fall off, often coming off in large sections whenever a storm hits. Buckled panels are perhaps one of the most commonly fixed problems by companies that perform roof repair.

Expended Screw Holes

Expanded screw holes are another problem for panel roofs. As time passes, wind and fluctuating temperatures cause the screw holes in panels to widen round the screws that hold the panels set up. This creates an area where water can leak underneath the panels and soak the roof deck. Once the deck becomes saturated, the problem is costly to fix.

Blistering

Improper heating procedures and dry lapping cause hot bituminous roof systems to blister. Although small blisters seldom pose a problem, large ones can rupture and invite water to seep beneath the bitumen. Once the blisters form, warm weather typically makes them worse. As a result of humid subtropical climate in a few regions of the united states, commercial roofing frequently experiences blistering.

Ponding Water

Blocked drains and improper sloping could cause water to gather in small ponds on a roof. Repairing a blocked drain is easy, but fixing a sloping problem is more technical. Often, installing a taper insulation system to determine a new slope is the best solution. During the rainy season, resolving ponding water is one of the most common types of roof repair.

Loose Flashing

Flashing prevents water from seeping in the crevice where in fact the roof abuts to protrusions such as chimneys and vents. Over Soft wash roof cleaning near me , most flashing must be resealed. If it is not, leaks may cause serious damage the deck and building interior. Most flashing problems are corrected during the course of scheduled maintenance.

Missing Mortar

Chimneys and high elements of brick walls that have sections of missing mortar may cause leaks. These leaks are often recognised incorrectly as leaks in the roof membrane, but a thorough inspection by a company that focuses on commercial roofing will reveal the real problem. Most parts of missing mortar can be repaired with basic tuck pointing procedures.

Conclusion

The problems above are a few of the most common reasons for roof repair. When they are corrected early, most problems are inexpensive to fix, but not addressing them until they cause serious problems may necessitate roof replacement. Having a scheduled maintenance agreement with a roofing company is the greatest solution to ensure problems are detected early.